SICO Roll N’ Set Serie Manual Del Proprietário página 2

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INTRODUCTION
The Roll N' Set is a mobile, folding performance stage
system used to build platforms of various sizes to facilitate
stage performance events. Typical multi-use venues for the
Roll N' Set are arenas, convention centers, and auditoriums.
• 8'x8' [2.44mx2.44m] folding supports
Available height ranges and height increments are:
• 32"-48" [80cm-120cm], 4" [10cm]
• 36"-54" [90cm-135cm], 6" [15cm]
• 39"-63" [100cm-160cm], 6" [15cm]
• 42"-60" [105cm-150cm], 6" [15cm]
• 48"-72" [120cm-180cm], 6" [15cm]
• Net weight = 1068 lbs. [485kg]
• Load ratings
• Standard duty – 125 psf [6.0 kN/m²]
• Heavy duty – 156 psf [7.5 kN/m²]
• 4'x8' [1.22mx2.44m] structural decks
• Pin connectors that connect the structural decks to the
folding supports; each folding support typically utilizes
(4) 2-pin connectors and (4) 4-pin connectors.
• Bridge bars for connecting folding supports to each
other and to provide additional structure when decks are
bridged.
• Side to side and end to end connectors between folding
supports; required if folding supports are adjacent to
each other (i.e., without bridged decks between them)
• Operator kit, which consists of
• Owner's manual
• T-Handle hex wrench – 5/16" [8mm] for securing
decks
• Thin head 1-1/8" wrench for adjusting glides on
folding supports
• Deck lifter to assist with deck removal
• Accessories, including
• Guardrails
• Step assemblies
• Drapes
• Ramp
• Terminology – In this manual, a master unit consists of a
folding support, two decks and a set of pin connectors.
The "side" is along the 8' [2.44m] deck edge and "end" is
along the 4' [1.22m] deck edge.
Important information for the operator of this product:
Please retain these instructions
Inspection by a qualified person is necessary prior
to commissioning this product for use.
Regular inspection of the product by a qualified
person is required.
Instruct operator to check fasteners for tightness
and damage to components.
Damaged parts must be replaced prior to
reinstallation/re-erection.
Intended for indoor use only.
End To End
Connector
END
Master Unit: Support,
Decks, Pin Connectors
Side To Side
Connector
SIDE
Page 2

Publicidad

Tabla de contenido
loading

Productos relacionados para SICO Roll N’ Set Serie

Tabla de contenido