I N S TA L L AT I O N
I N S T R U C T I O N S
S TA I N L E S S S T E E L
D R A W E R F R O N T
I N S TA L L AT I O N S P E C I F I C AT I O N S
The following illustrations provide the overall
dimensions and installation specifications for
the Wolf warming drawer with a stainless steel
drawer front.
Wolf recommends using a 838 mm wide
cabinet for the warming drawer with stainless
steel drawer front. A minimum 762 mm wide
by 610 mm deep cabinet is required with a
minimum base support of 91 kg.
Refer to pages 16–17 for stainless steel drawer
front installation instructions. These instruc-
tions are also included with the stainless steel
drawer front kit.
U N D E R C O U N T E R I N S TA L L AT I O N
For undercounter installations, 597 mm from
the bottom of the warming drawer opening to
the floor is recommended. It must be installed
a minimum of 127 mm above the floor or
25 mm above the toe kick.
The Wolf warming drawer with stainless steel
drawer front may be installed below an electric
or gas cooktop, provided the warming drawer
is fully enclosed, top and bottom. Allow
enough room for gas and electrical connec-
tions for the cooktop. Refer to installation
instructions for the cooktop for additional
specifications. Dimensions will vary according
to the specific installation.
Undercounter Installation – Stainless Steel Drawer Front
M O D E L I C B W W D 3 0
with Stainless Steel Drawer Front
Overall Width
Overall Height
Overall Depth
Depth Behind Frame*
Minimum Cabinet Width
Minimum Cabinet Depth
Minimum Base Support
Opening Width
Opening Height
Opening Depth
*Allow 10 mm additional depth for cord thickness.
Overall Dimensions – Stainless Steel Drawer Front
759 mm
260 mm
689 mm
597 mm
762 mm
610 mm
91 kg
727 mm
232 mm
606 mm
7