Selecting Ptz Presets On The Eco Series Dvr; Deleting Ptz Presets On The Eco Series Dvr; Starting / Stopping Ptz Cruise On The Eco Series Dvr - Lorex LZC7092B Manual De Instrucciones

6
Controlling the PTZ Camera with your DVR
2. (Optional) In the Time field, select the number of seconds the camera will
remain in that position during PTZ cruise before going to the next position.
3. Click Set to set the preset. The Total and No. fields will automatically in-
crease. The Total field shows you the total number of created presets, and
the No. field shows you the number of the preset you are currently
creating.
4. Repeat the steps above to create additional presets as needed. Press
Save when you are finished to save all created presets.

6.4.2 Selecting PTZ Presets on the ECO Series DVR

1. In the No. field, select the number of the preset you would like to select.
2. Click Go to to go to the preset.

6.4.3 Deleting PTZ Presets on the ECO Series DVR

1. In the No. field, select the number of the preset you would like to delete.
2. Click Clear to delete the preset, and click Save to save your changes.

6.4.4 Starting / Stopping PTZ Cruise on the ECO Series DVR

When PTZ cruise is enabled, the camera will cycle through saved presets.
You must set and save presets to use PTZ cruise.
To start / stop PTZ cruise on the ECO Series DVR:
1. Right-click to exit PTZ menu.
2. Right-click to open the Menu Bar and click the Start Cruise button (
Enter the DVR password (default: 000000). The camera will cycle through
PTZ presets.
3. To stop the PTZ cruise, right-click to open the Menu Bar and click the Stop
Cruise button (
#LX400006; r. 1.0/11219/11445; en-US
). Enter the DVR password (default: 000000).
).
15