Changing User Settings - CIAT CS2B Manual De Instalación

14.
Press the period ( ) button twice. P2 will
¹ËÀ ÇÆ ÌÀ½ ¼ÁËÈĹÑ
15. To change the hours, press the start time
( ) button.
16.
Press home ( ), Away (
17. Press the mode (M) button to set the Zone
mode either ON or OFF.
18.
Press hold ( ) button to set the Silent
mode either ON or OFF.
19. Similarly you can program P3, P4, P5 and P6.
20. If you did not select 1 to 7 when you
started this process, then repeat all the
steps for your remaining timeframe choice
– 1 to 5, 6 to 7 or individual day :
1, 2, 3, 4, 5, 6, 7
21. Ç »ÇÆ ÊÅ ÌÀ¹Ì ÌÀ½ ÌÀ½ÊÅÇËÌ¹Ì À¹Ë
accepted your changes, cycle through the
six time periods by pressing days (
selecting your time frame – 1 to
7(all days), 1 to 5(weekdays), or 6 to
7(weekends) or individual day : 1, 2, 3, 4,
5, 6, 7 – and then pressing the period (
button to see the Touch 'N' Go option
assigned for each start time, Zone Mode
Setting and Silent Mode setting. Each time
you press period ( ), you will advance to
the next start time.
22. Press OK button or close the lid.
) or Sleep ( ).
),
)
     
À¹Æ¿ÁÆ¿ ÀÇļÁÆ¿ ÌÀ½ ̽ÅȽʹÌÍʽ
You can temporary change temperature settings in one
zone (using the NUI placed in that zone).
1. Open the lid.
2.
Press the zone button ( ) to select
zone 0.
3. Press up or down buttons on the right side
until you reach the desired temperature
setting. This creates a "temporary hold"
until the next pre-set time period.
You will see schedule active icon
( ¹ËÀÁÆ¿ ÇÆ ÌÀ½ ¼ÁËÈĹÑ
4. To maintain that temperature setting so it
does not change during the next pre-set
time period, press hold ( ) symbol button
on the left side. The temperature will stay
at the setting you selected until you
release the hold. The schedule active icon
( ) will disappear.
5. To return the temperature to the pre-set
level for that time period, press hold ( ).
symbol. This releases the hold and the
temperature will return to its programmed
level. The schedule active icon (
appear.
6. Close the lid.
¼Î¹Æ»½¼ ÈÊǿʹÅÅÁÆ¿ ¼ÁËÈÄ¹Ñ »Ç¼½Ë
You can customize several system parameters. Refer to the
main unit documentation for the complete list and
description of paramenters.

4.3 - Changing user settings

Now you can change the settings of different features with
the NUI. Here is how you can program you thermostat
settings.
1. Open the lid.
2.
Press home ( ) and Away (
buttons and hold for 3 seconds. You will
˽½ È¹Ê¹Å½Ì½Ê ÆÍź½Ê ÁË ¹ËÀÁÆ¿ ÁÆ ÌÀ½
time display area.
3. Press mode (M) button, you will see
È¹Ê¹Å½Ì½Ê Î¹Äͽ ÏÁÄÄ º½ ¹ËÀÁÆ¿ ÁÆ ÌÀ½
temperature display area of the display.
4. Press up or down buttons to change the
settings to your desired value, which
ËÀÇÍļ º½ ÏÁÌÀÁÆ ÌÀ½ ʹƿ½ ËȽ»Á ½¼ ¾ÇÊ
ÌÀ¹Ì È¹Ê¹Å½Ì½Ê ¹Æ¼ ËȽ»Á ½¼ Á»ÇÆ ÏÁÄÄ º½
displayed for that particular parameter.
) will
)
11