Tripp-Lite NetCommander AGCB6533 Serie Manual Del Propietário página 19

Firmware Upgrade
3. On the upgrade computer (the computer connected to the KVM via the firmware
upgrade cable), go to the Tripp Lite website and download the NetCommander Firmware
Upgrade Utility .exe file, Firmware Upgrade .tfp file and Firmware Upgrade information
doc.
Note: The firmware upgrade information document will list the latest firmware for all
Tripp Lite NetCommander KVM switches and SIUs, which you will need to reference
when determining if your device has the latest firmware. The .tfp firmware upgrade file
contains firmware for both the KVM and SIUs.
4. Run the NetCommander Firmware Upgrade Utility .exe file, and follow the instructions
to install the utility on the upgrade computer.
1. Once installed on the upgrade computer, open the NetCommander Firmware Upgrade
Utility.
12-10-052-933244.indb 19
(continued)
19
10/15/2012 2:58:36 PM