Power Management Features - Sun Blade 1000 Guía De Inicio

Power Management Features

As an Energy Star
that certain configurations of this product meet the Energy Star
guidelines for energy efficiency. For information about which
configurations are compliant, select the Sun Blade 1000 link on the
http://www.sun.com website.
The Power Management
improves the energy efficiency of your system. Internal subsystems enter a low-
power mode after a specified period of inactivity. Power is returned to subsystems
on an as-needed basis.
While in low-power mode, your system retains network-awareness, such that it
responds to tasks directed to it. For details and information on how to change the
power management settings on your system, refer to the preinstalled "Solaris User
Collection" document, Using Power Management (see "Hardware and Software
Documentation" on page en-14).
The power-indicator LED in the center of the front panel power switch has three
states that indicate the power status of the system, as described in
Power-Indicator LED States
TABLE 3
LED Activity
LED off
LED blinking
LED on
Putting the System Into Low-Power Mode
Although the system (or subsystems) automatically enter low-power mode after a
period of inactivity, you can manually put the system into low-power mode, such as
when you are leaving for the day. To put a system into low-power mode:
1. Press the Sun Type-6 USB keyboard Power key (see
The system shutdown menu is displayed.
®
partner, Sun Microsystems, Inc. has determined
™
software that is integrated with your Solaris software
Meaning
System power is off or system is booting up.
All internal subsystems are in lowest possible power consumption
mode for this system*.
*Some hardware components and software drivers do not support
this system's lowest possible power consumption mode, when this
occurs, the power indicator LED will not blink.
Full power is on in one or more of the internal subsystems and
system self test has completed successfully.
.
TABLE 3
).
FIGURE 5
en-11