Optional Accessories - Best D49M30SB Manual Del Usuario

OPTIONAL ACCESSORIES

OPTIONAL
ACCESSORY
REMOTEUP/DOWN CONTROL
Use when you cannot reach the UP/
DOWN Button on the downdraft chimney.
Can be located on counter top, face of
cabinetry or on the side cabinet of an
island. Cut-out size: 2¼" H x 2" W.
Cannot be used where remote control
will interfere with cooking, where hot
pans could be set, or where hot liquids
MODEL ACRD
could be spilled on the control.
Remote wiring connects with 6-pin con-
nector on control box.
GAS COOKTOP SEAL KIT
Recommended for use with all gas
cooktops. Includes trim bracket and
trim seal.
MODELS
30", 36" & 48" widths.
ATSKD30
ATSKD36
ATSKD48
MAKE-UP AIR DAMPER
Use to provide make-up air when called
for to keep the home comfortable by
allowing the downdraft to operate at
optimum levels.
Directwire design works with select
BEST
air pressure by providing interlocked
make-up air; damper opens automati-
MODELS
cally when the range hood is activated
MD6T
MD8T
8" round & 10" round diameters.
MD10T
Connects to 2 CONTACTS on
ELECTRICAL PANEL.
RANGE TRIM KIT
Use with free-standing range - where a
gap is present between back of range
and downdraft.
30", 36" & 48" widths.
MODELS
ATKD30SB
ATKD36SB
ATKD48SB
DESCRIPTION /
APPLICATION
®
downdrafts to balance indoor
MAKE-UP
AIR DAMPER
CONTACTS
Models D49M30SB • D49M36SB • D49M48SB
OPTIONAL
ACCESSORY
MODEL AEWD5
MODEL ANKD
MODEL AFCD
MODEL AVDKD8
MODEL AVDKD10
MODEL AVDKD219
DESCRIPTION /
APPLICATION
EXTENSION CABLE - 5-FT.
Use where electrical panel is remotely
mounted. Extends electrical panel ca-
ble an additional 5-feet.
NON-DUCT
RECIRCULATING KIT
Use where ducting is not feasible or
available. Mount to toe kick or base of
a cabinet and attach directly to Model
PF6 Flex Blower using 8" round duct.
Kit can be rotated so that the exhaust
is not directly at your feet. Includes
recirculation filter and decorative cover
plate.
RECIRCULATION FILTER
REPLACEMENT
Replacement filter for ANKD Non-Duct
Recirculating Kit. Use to effectively
capture cooking contaminants.
1-7/8" X 19" TO 8" ROUND
TRANSITION
Rectangular to 8" round transition for
left, right, or rear exhaust - using Model
PF6 Flex Blower. Can be attached
to downdraft unit or rectangular duct
(AEDD2). Includes S-clips for easy,
secure attachment.
1-7/8" X 19" TO 10" ROUND
TRANSITION
Rectangular to 10" round transition for
left, right, or rear exhaust - using Model
PF6 Flex Blower. Can be attached
to downdraft unit or rectangular duct
(AEDD2). Includes S-clips for easy,
secure attachment.
RECTANGULAR ADAPTOR
FOR 1-7/8" X 19"
Use to connect 1-7/8" x 19" rectangular
duct directly to downdraft when using
side or rear exhaust.
Page 9