Other Equipment Connections; System Connections - Bose WAVE SOUNDTOUCH IV Serie Guia Del Usuario

O T H E R E Q U I P M E N T C O N N E C T I O N S

System connections

The connector panel provides connections for external equipment.
1 ANTENNA
3.5 mm FM antenna and 2.5 mm DAB antenna connectors (see page 20).
2 BoseLink connector
Input connector for the SoundTouch® pedestal.
3 AUX IN connector
3.5 mm stereo input connector for external sources (see page 19).
4
HEADPHONES
3.5 mm input connector for headphones (see page 19).
5 Control button
Disables Wi-Fi, initiates setup mode or restarts the SoundTouch® pedestal (see page 22).
6 Wi-Fi indicator:
• Blinking white – Searching for Wi-Fi network
• Solid white (dim) – Power-saving mode and connected to Wi-Fi network
• Solid white (bright) – System is on and connected to Wi-Fi network
• Solid amber – System is in setup mode
• Off – Wi-Fi networking disabled or system is connected to Ethernet
7 Ethernet connector
Used for a wired network connection.
8
SETUP A
USB Micro-B connector for network setup using a computer.
9 *
SETUP B
USB Standard A connector reserved for future use.
10 SERVICE connector
Used for special service functions. Not for customer use.
11 SoundTouch® pedestal Bose link cable
Plugs into the Bose link connector. It provides power and control signals to the SoundTouch® pedestal.
*
The USB connectors are not designed to charge smartphones, tablets or similar devices.
1 8 - E N G L I S H
8
5 6 7
1 2 3 4
10 11
9