Inserting And Ejecting A Sd Card - Olympus DS-2500 Manual De Instrucciones

Inserting and ejecting a SD card

Inserting a SD card
Insert the SD card fully into the card slot with the
card facing the direction shown in the illustration
below, until it clicks into place.
• When inserting SD card into the SD card slot, the
recorder message [Please Wait] will fl ash on the
LCD display for a few seconds while validating the
SD card.
• Insert the card keeping it straight.
Ejecting a SD card
Push the SD card inward once to unlock it, and
let it eject.
Notes
• The card stops with a click when it is inserted
all the way.
• Inserting the card the wrong way or at an angle
could damage the contact area or cause the
card to jam.
• If the card is not inserted all the way, data may
not be written to the card.
• Hold the card straight and pull it out.
• If an unformatted card is installed, the recorder
will automatically display the menu format option
(☞ P.37).
• Never use any card in the recorder unless it has
been formatted on this unit (☞ P.50).
• Never remove the card while the recorder is in
operation. This may damage the data.
• Releasing your finger quickly after pushing the
card inward may cause it to eject forcefully out of
the slot.
1
EN
19