Astralpool MAN14 Manual De Instrucciones página 10

Instruction Manual for Infrared Saunas
FIG-16 Assembling internal top board
18. During the course of putting down the internal top board, make sure all the wires (mentioned above) and
connecting plugs are slipped through the corresponding holes of the top board. All these wires will be led into
connecting with the controller on the internal top board. See FIG-17
19. All the infrared heaters are pre-assembled. See FIG-18. Connect all the wires and connectors to the
corresponding outlets on the top board. Please be sure that all the plugs are connected tightly.
FIG-18 Connectors on the external top board
20. After that, put down the power plugs of the speakers, temperature sensor, control panel and CD player through
the hole near the fan on the top board. See FIG 19
21. All the wirings from top board should be linked with corresponding connectors of the control panel, the CD player,
the temperature sensor and the radio antenna. Otherwise, the sauna will not function if any connections are
missed. See FIG 20-23.
FIG-17 Leading the wires of heaters onto the
board through the corresponding hole
FIG-19 Put down the wires into the sauna cabin
9