Instruction Manual for Infrared Saunas
FIG-20 Link the CD connectors
FIG-22 Link the control panel connectors
21. Take down the bag of screws affixed to the CD box; use a cross screwdriver to screw in the CD Box over the CD
player. See FIG-24, 24.1
FIG-24 CD player back cover and screws
22. Making sure all steps are finished correctly, plug in the power and try using the sauna at first to make sure it will
work properly. Then put the external top board over the internal top board, and take out the power plug through
the corresponding hole in the external top board. See FIG-25
FIG-21 Link the sensor connectors
FIG-23 link the antenna connectors
FIG-24.1 Fix the CD player back cover with screws
10