Error Description - Phocos CX-10 Manual De Instrucciones

Error Description

Error condition
Loads are not
supplied
Display
Battery is low
Overcurrent /
Short circuit of
Controller is
overloaded and has
disconnected the
Battery voltage
(>15.5 / 31.0 V)
Battery wires or
battery fuse
damaged, battery
has high resistance
40
Reason
Load will reconnect
as soon as battery is
Switch off all loads.
Remove short circuit.
Controller will switch
loads
on load automatically
after max 1 minute.
thermally
After cooling down the
loads are reconnected
loads.
Check if other sources
overcharge the battery.
too high
Remedy
recharged.
Check proper
ventilation of
controller.
automatically.
If not, controller is
damaged.
Check battery
wires, fuses and
battery.