Insignia NS-DVDR1 Guia Del Usuario página 33

Ocultar thumbs Ver también para NS-DVDR1:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NS-DVDR1 DVD Recorder
The
No disc is inserted
recorder
does not
start
playback
An unplayable disc
is inserted
The disc is placed
upside down
The disc is not
placed within the
guide
The disc is dirty
The Rating level is
set
The remote
There is an obstacle
control does
in the path of the
not work
remote control and
correctly
your recorder
The batteries in the
remote control are
exhausted
The remote control
is not pointed at the
remote sensor of
the recorder
The remote control
is too far from the
recorder
The
The camcorder is
camcorder
off
image is not
shown
The
The recorder's
camcorder
source is set
image is not
incorrectly
shown on
TV screen
Timer
The recorder clock
recording is
is not set to the
not possible
correct time
The timer has been
programmed
incorrectly
The TIMER Record
indicator light does
not appear after
programming the
timer
Picture or
Antenna or cables
sound of a
are loose
channel is
weak or
Wrong tuning band
missing
is selected in the
Recorder Setup
menu.
Insert a disc (make sure that
the disc indicator in the display
window is lit)
Insert a playable disc. (Check
the disc type and Regional
code.)
Place the disc with the
playback side down
Place the disc on the disc tray
correctly inside the guide
Clean the disc
Cancel the Rating function or
change the rating level
Remove the obstacle
Replace the batteries with new
ones
Point the remote control at the
remote sensor of the recorder
Operate the remote control
within 23ft (7m)
Turn camcorder on and
operate it correctly
Use INPUT to select the
correct input channel (AV1,
AV2 or DV IN)
Set the clock to the correct
time
Reprogram the Timer
Reprogram the Timer and turn
off the recorder to enable the
timer
Tighten connections or replace
the cable
Try Tuning Band Select
options. See "Using the Setup
Menu" on page 14
www.insignia-products.com
Cannot play
The disc was
disc a
recorded in Video
recorded on
mode
your
recorder on
Some players will
another
not play even a
DVD player.
finalized disc
recorded in Video
mode
The disc was
recorded in VR
mode
Discs recorded with
copy-once material
cannot be played on
other players
Cannot
The remaining
record or
blank space on the
did not
disc is insufficient
record
successfully
The source you are
trying to record is
copy-protected
When setting the
recording channel,
the channel is tuned
on the TV's own
tuner.
When recording to a
Video mode disc,
programs that are
copy-once
protected cannot be
recorded
Stereo
TV is not
Audio
Stereo-compatible
Record or
Playback is
Broadcast program
not present
is not in stereo
format
Recorder A/V Out
jacks are not
connected to TV
A/V In jacks
Recorder
Audio/Video Out is
not selected for
viewing at the TV
Recorder's TV
audio channel is set
to SAP or MONO.
Finalize the disc. See "Disc
Settings" on page 15.
No solution
The other player must be RW
compatible in order to play the
disc
No solution
Use another disc
You cannot record the source
Select the channel on the
recorder's built-in TV tuner by
setting the TV tuner to the
recorders RF output channel.
Use a VR mode formatted disc
for copy-once material
No solution
No solution
Make A/V connections. Stereo
is available only on A/V output
from recorder.
Select AUX or A/V source as
TV input
Set TV audio channel mode to
Stereo. See "Changing the TV
audio channel" on page 16.
31

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido