Publicidad
Idiomas disponibles
Idiomas disponibles
English
Fan
Boreal 12 Elegance
Boreal 16C Elegance
Dear customer,
Many thanks for choosing to purchase a TAURUS brand product.
Thanks to its technology, design and operation and the fact that it exceeds the
strictest quality standards, a fully satisfactory use and long product life can be
assured.
Description
A Front grill
B Guard securing
C Spinner lock nut
D Propeller
E Guard lock nut
F Rear grill
G Motor shaft
H Shaft pin
I Oscillation control knob
J Motor cover
K Stand tube
L Base plate
M Bulge
N Upper stand tube *
O Lower stand tube *
P Speed button
Q Power cord
R Screw *
S Handle
*Only available on Boreal 16C Elegance
- Read these instructions carefully before switching on the appliance and keep
them for future reference. Failure to follow and observe these instructions could
lead to an accident.
Safety advice and warnings
- This appliance can be used by
children aged from 8 years and above
and persons with reduced physical,
sensory or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved.
- Cleaning and user maintenance shall
not be made by children unless they
are supervised.
- This appliance is not a toy. Children
should be supervised to ensure that
they do not play with the appliance.
- Ensure that the fan is switched off
from the supply mains before start any
installation or assembly operation.
- Disconnect the appliance from the
mains before undertaking any cleaning
Manual Boreals Elegance.indb 8
task. Ensure that the fan is switched off
from the supply mains before removing
the guard.
- If the connection to the mains has
been damaged, it must be replaced,
take the appliance to an authorised te-
chnical support service. Do not attempt
to disassemble or repair the appliance
by yourself in order to avoid a hazard.
- Ensure that the voltage indicated on the rating label matches the mains
voltage before plugging in the appliance.
- Connect the appliance to a socket that can supply a minimum of 10 amperes.
- The appliance's plug must fit into the mains socket properly. Do not alter the
plug. Do not use plug adaptors.
- The appliance must be used and placed on a flat, stable surface.
- CAUTION: In order to prevent overheating do not cover the appliance.
- Do not use the appliance if the cable or plug is damaged.
- If any of the appliance casings breaks, immediately disconnect the appliance
from the mains to prevent the possibility of an electric shock.
- Do not use the appliance if it has fallen on the floor, if there are visible signs of
damage or if it has a leak.
- CAUTION: Maintain the appliance dry.
- CAUTION: Do not use the appliance near water.
- Do not use the appliance near bathtubs, showers or swimming pools.
- Do not use the appliance with damp hands or feet, or when barefooted.
- Do not force the power cord. Never use the power cord to lift up, carry or
unplug the appliance.
- Do not wrap the power cord around the appliance.
- Do not clip or crease the power cord.
- Check the state of the power cord. Damaged or tangled cables increase the
risk of electric shock.
- The appliance is not suitable for outdoor use.
- Supply cord should be regularly examined for signs of damage, and if the
cord is damaged, the appliance must not be used.
- Do not use or store the appliance outdoors.
- Do not leave the appliance out in the rain or exposed to moisture. If water
gets into the appliance, this will increase the risk of electric shock.
- Do not touch the plug with wet hands.
- Do not touch any of the appliance's moving parts while it is operating.
Use and care:
- Fully unroll the appliance's power cable before each use.
- Do not use the appliance if the on/off switch does not work.
- Use the appliance handle, to catch it or move it.
- Do not use the appliance if it is tipped up and do not turn it over.
- Do not turn the appliance over while it is in use or connected to the mains.
- Unplug the appliance from the mains when not in use and before undertaking
any cleaning task.
- This appliance is for household use only, not professional, industrial use.
- This appliance should be stored out of reach of children and/or the disabled.
- Make sure that dust, dirt or other foreign objects do not block the fan grill on
the appliance.
- Keep the appliance in good condition. Check that the moving parts are not
misaligned or jammed and make sure there are no broken parts or anomalies
that may prevent the appliance from operating correctly.
- Never leave the appliance connected and unattended if is not in use. This
saves energy and prolongs the life of the appliance.
Service:
- Any misuse or failure to follow the instructions for use renders the guarantee
and the manufacturer's liability null and void.
Installation
- Be sure to remove all packaging material from inside the appliance.
- Ensure that the fan is switched off from the supply mains before start any
installation or assembly operation.
- The appliance should be used with its base fitted.
Assembling the desk fan:
- Remove the spinner lock and guard lock nut from the motor shaft spindle.
-Fit the rear guard, by the positioning on the location pins. Secure the guard to
the motor body with the guard lock nut.
-Push the fan blade onto the motor shaft by matching the slots on the base of
the blade with the shaft pin.
-Secure the blade with the spinner lock nut. the spinner lock nut must be
06/03/15 17:22
Publicidad
