Desmontaje (Psw) - Wacker Neuson PS2 800 Manual De Operación

PS / PSA / PSW...
3.6

Desmontaje (PSW)

See Graphic: wc_gr005934
3.6.1
3.6.2
WARNING
8
7
6
5
4
3
2
1
wc_tx000990es.fm
Removing the strainer stand and volute:
Remove the three hex nuts (1) under the strainer stand (2), then
remove the strainer stand, stud bolts (3), and volute (4).
Removing the impeller:
With a box wrench or other tool, remove the acorn nut (5) and
lockwasher (6), then remove the impeller (7), wear ring (8) shaft sleeve
(10), and V-ring (11) from the shaft.
A worn impeller may have sharp edges that can cause injury and
should be handled with care.
wc_gr005934
27
Mantenimiento
13
12
9
11
10