Standard Operation - Dehumidification Mode; Standard Operation - Fan Mode - Friedrich DWC1 Manual De Instalación Y Operaciones

Owner's instruction

Standard Operation - Dehumidification Mode

It removes humidity while air-cooling weakly.
•
In rainy season or high humidity climate, it is possible to operate simultaneously dehumidifier and
cooling mode to remove humidity effectively.
•
The menu item of wind powerfulness might not be partially selected according to the product.

Standard Operation - Fan Mode

It blows the air as it is in the indoor, not the cold wind.
•
Ventilation drive does not release cool wind but general fan
•
Because it releases the wind that has no temperature difference from the room, it functions to
circulate the inside air.
•
The menu item of wind powerfulness might not be partially selected according to the product.
24 DWC1 Programmable Thermostat
Press button to turn on the
1
indoor.
Press button to select
2
Dehumidification mode.
The temperature setting can not be
adjusted during operation this mode.
Press the
3
airflow rate feeble → weak →
medium → strong → automatic.
(The initial wind powerfulness of
humidity removal drive is 'weak'.)
Press button to turn on the
1
indoor.
Press button to select Fan
2
Mode.
Every time pressing
3
can select wind flow in order of Very
Low → Low → Medium → High →
Very High.
When running ventilation,
compressor of AHU doesn't work.
button to select
button, you