Safety; Installation; Important - Euronda JOLLY BOX Manual Del Usaurio

Before installing your Jolly Box read these safety instructions carefully. Failure to follow them
could cause malfunction or damage.
DO NOT PLACE THE DEVICE NEAR ANY HEAT SOURCE.
DO NOT EXPOSE THE DEVICE TO DIRECT LIGHT FROM WINDOWS
OR LIGHT SOURCES.
WARNING
WHEN MOVING THE DEVICE BE CAREFUL OF ANY LIQUIDS IN THE
CONTAINERS
TAKE SUITABLE CARE WHEN HANDLING DEVELOPING AND FIX-
ING FLUIDS, FOLLOWING THE MANUFACTURER'S INSTRUCTIONS.
After taking your Jolly Box out of the package, place it on a flat surface far from any sources
of heat or light. Remove the protective casing by lifting it off the base and fill the containers as
follows: dilute the concentrated solutions as indicated by the manufacturer, with water at a tem-
perature of about 25°C to a height of about 2 cm from the top of each container, and respect-
ing the label indicating DEVELOPER and FIXER. Fill with plain tap water, also at a temperature
of °C the containers labeled WATER.
IMPORTANT: always place the water in the containers before the concentrat-
ed chemical products. Stir well and cover the trays.
6
PART 2

SAFETY

INSTALLATION

JOLLY BOX
®