Power Saving - Climadiff CVP Serie Manual De Utilización

Caution! Cleaning and servicing
Before carrying out servicing, switch off the power supply and disconnect the
•
appliance.
When cleaning the appliance, do not use metal objects, steam systems,
•
volatile fluids, organic solvents or abrasive substances.
Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
•
Important information concerning installation!
To ensure proper electrical connection, follow the recommendations given in
•
the present manual.
Unpack the appliance and visually check that it is not damaged. Do not
•
connect a damaged appliance. Inform your retailer or point of sale of any
damage. In such a case, keep the packaging.
It is recommended that the appliance be allowed to settle for at least 4 hours
•
before connecting the electrical power supply, so that the compressor fluid feed is
correct.
Proper air circulation is necessary to avoid overheating. To ensure sufficient
•
ventilation, observe the installation recommendations provided.
In order to avoid fire risk, wherever possible, ensure that the appliance is not in
•
contact with walls or with any hot element (compressor, condenser). Observe the
installation recommendations.
The appliance should not be placed close to radiators or cooking hot plates or
•
gas rings.
Check that electrical sockets remain accessible when the appliance is installed.
•

POWER SAVING

To limit the electricity consumption of your appliance:
• Install it in an appropriate place (see "Installing your appliance").
• Leave the doors open as little time as possible.
•To ensure that the appliance operates properly, clean the condenser regularly
(see "Routine servicing of your appliance").
• Regularly inspect the door seals and ensure that they are still closing properly.
If this is not the case, contact your after-sales service.
29