Connections - Korg Beat Boy Manual De Usuario

Connections

Input - INPUT jack
Connect a cable to your guitar or electric
bass and plug the other end of the cable into
the Beat Boy's INPUT jack. When tuning or
recording using the internal mic, press the
DIST/MIC button to select the internal MIC.
The INPUT jack is only for a 1/4" mono
cable. Stereo (TRS) cables cannot be used.
Even if a device is connected to the INPUT
jack, the audio input will be captured by
the internal mic when the MIC is selected.
Output - PHONES jack
You can connect headphones with a 1/8"
mini-plug to the PHONES jack.
When plugged in, no sound will be heard
from the speaker. Use the volume control to
adjust the volume of the headphone output.
Switching distortion type or internal mic
Each time the DIST/MIC button is pressed,
you can switch the input (distortion type or
internal mic).
Display Input
Guitar INPUT jack
Guitar OD INPUT jack
Guitar DIST INPUT jack
MIC Internal mic
Distortion type
Clean
(no distortion)
Overdrive
Distortion
-
17