Formatting while using batteries
We recommend using USB power when
formatting the unit. ()Page 39 "Formatting
while using USB power")
1.
Turn off the power to the Beat Boy.
2.
While pressing and holding down the
A-B/DELETE button and the REC button,
press the RECORDER ON button.
3.
Follow the same procedure as that for
formatting while using the batteries.
When the formatting procedure is
complete, the power is turned off.
) Page 39 "Formatting while using USB
power"
40
Troubleshooting
Power does not turn on.
• Could the battery symbol be blinking?
Replace the batteries. Recording is not
possible if the battery symbol is blinking.
• Make sure the batteries are inserted with
the polarities (+, -) in the correct orientation.
Nothing appears on the display.
• Is the power to the Beat Boy turned on?
No sound is heard from the speaker.
• Are the headphones connected correctly?
• Make sure that the volume is not set to "0."
• Make sure that the battery power is
sufficient.
Cannot record.
• Make sure that sufficient memory space is
available. Check the available recording time.
• Make sure that the battery power is
sufficient.