Black+Decker JE9000BD Manual De Instrucciones página 20

ASSEMBLING YOUR
JUICE EXTRACTOR
Step 1: With motor on a flat surface, place pulp
separator on motor base, aligning the tabs
and turning clockwise to lock in place.
Step 2: Grab filter basket by the outer rim and place
into pulp separator, pushing down to lock in
place.
Note: Use caution when handling filter basket as
blades may be sharp.
Step 3: Place lid on top of pulp separator, aligning
tabs and turning clockwise to lock in place.
Step 4: Slide the pulp container under the lid: first place
the opening under the lid at an angle and then
slide the bottom in towards the base.
Step 5: Place juice cup or your own container under
the anti-drip spout. Open the anti-drip
spout by turning counterclockwise and you
are ready to juice!
20