Black+Decker JE9000BD Manual De Instrucciones página 22

DISASSEMBLING YOUR
JUICE EXTRACTOR
Step 1: Make sure the juicer is off and
unplugged. Remove the easy-grip
pulp container from the motor base
by sliding the bottom out and pulling
away from the underside of lid.
Note: Make sure the anti-drip spout is in the closed
position.
Step 2: Remove the entire top assembly as one piece
(the lid, pulp separator and filter basket) to
prevent pulp from falling. When this is done,
the filter basket will automatically release
within the pulp separator for disassembly.
Step 3: Take entire top assembly to the sink to
disassemble and clean.
Step 4: Remove food pushers.
Step 5: Remove lid by holding anti-drip spout and
turning lid counterclockwise to unlock.
Step 6: Carefully lift filter basket out of pulp
separator.
Step 7: Wash all parts as instructed in
CARE & CLEANING section
22