Magneti Marelli FLEX TESTER Guía Rápida página 67

•
TIME/DIV. Set the timing scale.
Possible values are: 200ns/div, 400ns/div, 1us/div, 2us/div, 4us/div, 1ms/div, 2ms/div,
4ms/div, 10ms/div, 20ms/div, 40ms/div, 100ms/div, 200ms/div, 400ms/div, 1s/div, 2s/div,
4s/div, 10s/div. Pay attention with the higher scale as the refresh period could be more
than 1s. For the scale 400ms/div, 1s/div, 2s/div, 4s/div, 10s/div, 20s/div the software is
automatically set to «roll mode». Roll mode means that the screen is updated rolling
because the timing permits this.
All these scales are acquired without using «time equivalent software»
A RED or BLUE ARROW in the top or in the bottom of the screen means that the
electrical signal is present, but amplitude signal is greater than the amplitude value
selected.
11