Scope - Easy Scope; Scope - Functions - Magneti Marelli FLEX TESTER Guía Rápida

Scope – Easy Scope
Easy Scope is an innovative concept that integrates technical data regarding how to test
the component (sensor or actuator), reference waveform with hyperlink permits to set
amplitude/timing of scope/multimeter.
•
Select component to investigate. Click on EasyScope ComboBox and select the
specific component.
•
Full screen scope. Click on specific button to
•
Full screen technical data. Click on the specified button to show only the scope on
the screen
•
Half screen scope/technical data. Click on the specified button to show scope and
technical data simultaneously on the screen.
Scope – Functions
Select «FUNCTIONS» combo box to activate MATH or FFT analysis.
After MATH selections please select MATH functions into the window and confirm the
selections.
15