Diagnostic - Diagn/Road - Magneti Marelli FLEX TESTER Guía Rápida

Diagnosis – Control unit selection
After the vehicle selection the tester will show all control units that can be diagnosed. If the
control units are not listed it is possible to use the "control unit search function" described
in the previous paragraph to check whether the diagnosis software designed for another
vehicle is compatible with the requested control unit.
Press OK function to gain access to the relevant section.
Diagnostic – Diagn/Road
Upon vehicle selection both cable to be used and position are indicated. Once confirmed,
the message will be displayed in the main diagnosis when the diagnosis specific software
has been loaded in the instrument.
22