AIR INTAKE FILTER
The dryer should be cleaned regularly, including the air intake filter. Refer to the Air Intake
Filter chart when cleaning the filter.
NOTE: Unplug the power cord before cleaning any part of the dryer.
1
Remove the air intake filter by pulling outward while holding the filter housing by its top and bottom.
NOTE: The air intake filter must be installed when operating the dryer. The air intake filter must
be cleaned before and after each use.
2
The air intake filter consists of two (2)
parts: filter housing and air intake filter.
3
Remove the air intake filter inside the
filter housing. Clean the filter using a
soft brush or a vacuum cleaner.
4
Reassemble the air intake filter inside
the filter housing, then reinstall the
filter housing by pushing the housing
upwards with your thumb until the latch
is secured to the dryer.
Air Intake Filter
Filter Housing
Cleaning the Air Intake Filter
EN-16
Air Intake Filter
Filter Housing