Configuration Of Internal Parameters (Setup Mode) - Promax PROFI-70 Manual De Instrucciones

4.2.1 Configuration of internal parameters (SETUP MODE)

To access the configuration menu for the internal parameters of the device, press
the direct access key to access the main menu from any operational mode (CONFIG,
SEARCH, SCAN, ANALYSE, etc.). Then select the SETUP [F1] option from the lower
selection box.
The configuration menu for internal functions of the device is made up of the
following page of options.
Figure 5. - Configuration of internal parameters (SETUP)
To modify the status of a parameter, press the navigation buttons [6] until the
arrow marks it. Then activate it by pressing the select button [7]. The navigation buttons
[6] can be used to modify the value from among the available options. Finally, to
validate the new status, press the select button [7] again.
The internal parameter configuration page allows the following parameters to be
set:
a) TIME
To change the time, select the TIME field and enter the time using the alphanumeric
keypad. First, the hour field is modified. Next press the [8]
minutes. Last, press the select button [7] to confirm the new time.
Page 16
USER'S MANUAL. PROFI-70
. key to enter the
02/2007