SOMFY Sonesse 30 DCT Guia De Instalacion página 7

USE
MY position
1) Recording MY position
To set the MY position, move the
shade to the desired position with the
UP and DOWN buttons then press
the STOP button until the shade jogs
once.
2) Changing the MY position
To change the MY position go to the
new desired MY position with the UP
and DOWN buttons then press the
STOP button until the shade jogs
once.
3) Delete the MY position
To delete the MY position, move to this
position and press the STOP button
until the shade jogs once.
Mode Selection
By factory default, the motor is in
Roller mode but you can change from
a mode to another.
To change from a Roller mode to a
Tilting mode, press the UP, STOP and
DOWN buttons simultaneously until
the shade jogs once.
Copyright © 2008 Somfy SAS. All rights reserved - V0 - 11/2008
1
2
3
5