SOMFY Sonesse 30 DCT Guia De Instalacion página 8

With the setting tool, it is possible
to cancel and exit the speed or limit
adjustment mode by simultaneously
pressing the UP, STOP, and DOWN
buttons. These modes will also be
cancelled with inactivity of 2 minutes.
Adjusting the roller speed
1) Press and hold the STOP button
until the shade jogs twice.
The shade moves up and down auto-
matically in 10 second cycles.
2) While the shade is moving, briefly
press the UP button to increase the
speed or DOWN button to decrease
the speed.
3) To confirm the new speed, press
and hold the STOP button until the
shade jogs.
Adjusting the Tilting speed
1) Press and hold the STOP button
until the shade jogs 3 times.
The shade moves up and down auto-
matically in 10 second cycles.
2) While the shade is moving, briefly
press the UP button to increase the
speed or DOWN button to decrease
the speed.
3) To confirm the new speed, press
and hold the STOP button until the
shade jogs.
6
1
2
3
1
x3
2
3
Copyright © 2008 Somfy SAS. All rights reserved - V0 - 11/2008
10s
10s