Genicom 5000 Serie Guía De Referencia Rápida página 33

5000 Series Quick Reference Guide
8. Remove the ribbon deck by lifting upward.
9. Using a soft brush or vacuum, remove any paper dust that has
accumulated inside the printer.
10. Replace the ribbon deck and tighten the thumbscrews.
11. Reinstall the ribbon cartridge by following the procedures described
in the "Installing New Ribbon" section.
12. Clean the outside surfaces of the printer with a clean, damp cloth.
Dry the surfaces with a clean dry cloth.
Do not use any cleaning solutions!!!
13. Reconnect the power cord.
14. Turn the printer on.
Warning
Power Switch
Fuse Holder
Power
32
GEK-99012D