SPIT 383 SVC Manual Original página 10

OBJ_BUCH-2829-001.book Page 10 Wednesday, April 6, 2016 3:07 PM
 Restarting Protection
In chiselling mode, the restarting protection pre-
vents uncontrolled starting of the machine after a
power failure.
– To restart the operation, switch the On/Off
switch to the Off position and start the machine
again.
 Vibration Damper
The integrated vibration damper reduces occur-
ring vibrations.
Symbols
The following symbols are important for reading and
understanding the operating instructions. Please take
note of the symbols and their meaning. The correct in-
terpretation of the symbols will help you to use the ma-
chine in a better and safer manner.
Symbol Meaning
SPIT 383 SVC: Rotary Hammer
Grey-marked area: Handle
(insulated gripping surface)
Article number
XXXXXX
Read all safety warnings and all
instructions
Before any work on the machine
itself, pull the mains plug from the
socket outlet
Wear protective gloves
Always wear ear protection.
Wear safety glasses/goggles
Movement direction
1 609 92A 2KR • 6.4.16
Symbol Meaning
Reaction direction
Next step of action
Prohibited action
Hammer Drilling
Chiselling
Vario-Lock
Switching On
Switching Off
On/Off switch lock-on
Releasing the On/Off switch
Low speed/impact rate
High speed/impact rate
Tool holder
Apply a light coat of grease to the
shank end of the application tool
Service Indicator
P Rated power input
1
E Impact energy per stroke accord-
ing to EPTA-Procedure 05/2009
n No-load speed
0
Restarting Protection
Ø
Drilling diameter, max.
Concrete
English | 10