Tripp-Lite SRCOOLNET Instalación Y Guía De Inicio Rápido página 11

Installation
B
SRCOOL12K will now begin cooling when the temperature reading at EnviroSense
equals or exceeds the setpoint value you entered. When the temperature falls below
this setpoint, the unit will stop cooling. If the 'Always On' checkbox is checked, the
fans will remain running when the unit stops cooling. If the 'Always On' checkbox is
unchecked, the fans will shut off and the SRCOOL12K display will extinguish. Once
the temperature reaches the setpoint again, the unit will restart and begin cooling
until the temperature reported by EnviroSense returns below the setpoint. This cycle
will continue indefinitely until you select STOP from the SRCOOLNET user interface.
11
13-08-187 93-32CA.indb 11 9/27/2013 9:25:22 AM