Maintenance And Cleaning; Avoiding Bad Odors; Protecting The Plastic Surfaces; Door Glass - Summit FF1512SSIM Manual De Instrucciones

6

Maintenance and cleaning

Service life of the product is increased if
it is regularly cleaned
B
WARNING:
before cleaning your refrigerator.
• Never use any sharp or abrasive tools,
soap, household cleaners, detergent
and wax polish for cleaning.
• Dissolve one teaspoon of baking soda
in a half-quart of water. Soak a cloth
with the solution and wring it out
thoroughly. Wipe the interior of the
appliance with this cloth and then dry
thoroughly.
• Make sure that no water enters the
lamp housing and other electrical
items.
• Clean the door with a damp cloth.
To remove door and body shelves,
remove all of its contents. Remove
door shelves by moving them
upwards. After cleaning, slide them
from top to bottom to install.
• Never use cleaning agents or water
that contain chlorine to clean the
outer surfaces and chromium coated
parts of the product. Chlorine causes
corrosion on such
• Do not use sharp, abrasive tools,
soap, household cleaning agents,
detergents, kerosene, fuel oil, varnish
etc. to remove fingerprints on the
plastic parts. Use lukewarm water
and a soft cloth for cleaning and then
wipe it dry.

6.1. Avoiding bad odors

Materials that may cause odor are not
used in the production of our appliances.
However, inappropriate food preserving
conditions and not cleaning the inner
surface of the appliance as required can
bring forth the problem of odor.
First unplug the product
metal surfaces.
Therefore, clean the refrigerator with
baking soda dissolved in water every 15
days.
• Keep the food in closed containers.
Microorganisms spreading out from
uncovered containers can cause
unpleasant odors.
• Never keep foods that have expired
Best Before dates and spoiled in the
refrigerator.
6.2. Protecting the
plastic surfaces
Clean with warm water immediately as
oil may damage plastic surfaces.
6.3.

Door Glass

Remove the protective foil on the glass.
There is a coating on the surface of
the glass.This coating minimizes the
stain build-up and helps to remove the
possible stains and dirt easily. Glass that
is not protected with such a coating
may be subject to persistent binding of
air or water based organic or inorganic
dirt such as limescale, mineral salts,
unburned hydrocarbons, metal oxides
and silicones that can easily and quickly
cause stains or material damage. Keeping
the glass clean becomes too difficult
despite regular cleaning. Consequently,
the appearance and the transparency
of the glass deteriorates. Harsh and
corrosive cleaning methods and
compounds will intensify these defects
and speed up the deterioration process.
Water-based cleaning products that are
not alkaline and corrosive must be used
for regular cleaning purposes.
24 /29 EN
Refrigerator / User Manual