Installation; Appropriate Installation Location - Summit FF1512SSIM Manual De Instrucciones

Installation

3
3.1. Appropriate
installation location
Contact an Authorized Service for the
installation of the product. In order to
prepare the product for use, refer to
the information in the user manual and
ensure that electrical installation and
water installation are appropriate. If not,
call a qualified electrician and technician
to have any necessary arrangements
carried out.
WARNING:
B
not be held liable for damages that
may arise from procedures carried
out by unauthorized persons.
WARNING:
B
be plugged in during installation.
Otherwise, there is the risk of
death or serious injury!
WARNING:
of the room where the product will
be placed is so tight as to prevent
A
passing of the product, remove
the door of the room and pass
the product through the door by
turning it to its side; if this does
not work, contact the authorized
service.
• Place the product on an even floor
surface to prevent jolts.
• Install the product at least 12 inches
away from heat sources such as
radiators and stoves and at least 2
inches away from electrical ovens.
• Product must not be subjected to
direct sun light and kept in humid
places.
Manufacturer shall
Product must not
If the door clearance
8 /29 EN
• Appropriate air ventilation must be
provided around your product in order
to achieve an efficient operation. If the
product is to be placed in a recess in
the wall, pay attention to leave at least
2 inches distance from the ceiling and
side walls. Also allow 2" at the back
• Do not install the product in places
where the temperature falls below
23°F (-5°C).
Refrigerator / User Manual