Summary Of Connections; Connection 1 (Shower); Connection 2 (Washbasin); Connection 3 (Air Conditioning) - Vetus GWDS Manual De Manejo Y Instrucciones De Instalación

3.2 Summary of connections

1 Shower
2 Washbasin
3 Air conditioning
4 Drain

3.3 Connection 1 (shower)

A shower can be connected to the side connection.
Using a sharp knife, remove the closed side of the connection piece
(A).
- Fit the connection piece (A) over the side connection and clamp
this with the plastic clamp (B).
- Fit a reducing piece (not supplied) of ø 40 mm to the correct hose
diameter in the connecting piece (A) and clamp this with the
plastic clamp (C).
- Fit the hose.
GWDS

3.4 Connection 2 (washbasin)

Using a sharp knife, cut open one of the circles indicated.
Trim the cut surface well. Remove any sawdust from the GWDS.
- Place the connection piece (C) in the opening.
- Place a ø 40 mm reducing coupling (not supplied) to the desired
hose diameter in the connection piece (C) and attach it with the
help of the hose clamp (D).
- Fit the hose.

3.5 Connection 3 (air conditioning)

Drill an ø 8 mm hole in the hose connection, through the container.
Attach the ø 12 mm hose.
ENGLISH
7
110120.01