About Your Digital Bath Fan Control - Honeywell HVC0001 Guia Del Usuario

Owner's Guide 400-305-000-EFS

About your digital bath fan control

The HVC0001/HVC0002 controller has been designed to control a single-speed bath fan. To suit the
user's preference and lifestyle, it can be programmed in any the following modes of operation:
• Manual Mode (see page 10)
• Daily On/Off Program Mode (see page 11)
• Customized Cycle Program Mode (see page 12)
• ASHRAE 62.2 Program Mode (see page 13)
Unlike the four programmable modes mentioned above, the Countdown Mode can easily be
activated by simply pressing a button. In this mode, the fan is always On. At the end of the
countdown, set by the user, the controller returns to the programmed mode (see page 14).
This controller cannot be used with a load lower than 0.1 A or higher than 2.5 A.
The controller can be used to control a bath fan's built-in light or a separate light fixture
connected to the bath fan control circuit. However, the light cannot be independently
controlled and will turn On or Off at the same time as the fan.
2