Klarstein Barett Manual De Uso página 29

Replacing the bulb
• The bulb must be replaced by the manufacturer, its customer service or similarly
qualified persons.
• Always turn off the power before performing any work on the unit. When handling
the bulb, make sure it is completely cool before touching it directly with your hands.
• When inserting or removing the bulb, always hold it with a cloth or gloves to ensure
that sweat does not come into contact with the bulb, as this may shorten the life of
the bulb.
How to replace the bulb:
1 Before changing the bulb, make sure that the hood is off.
2 Turn the cover counterclockwise. Loosen the screw of the stainless steel filter and
remove it.
3 Press the bulb connector to remove the bulb.
4 Install the new bulb and reconnect the cable.
Important information about the bulb type
LED type: round glass lamp
Maximum wattage: 1 W
Voltage range: DC 4V
Dimensions: see picture
EN
29