Safety Instructions; Before The First Use - Krups PERFECT MIX KB403 Manual De Instrucciones

CAUTION: the safety precautions are part of the appliance. Read them carefully
before using your new appliance for the first time. Keep them in a place where you
can find and refer to them later on.
A Motor unit
B "Smoothie" button
C "Ice crush" button
D "Auto clean" button
E Control knob
F Blender jug assembly
F1 Blade unit
F2 Locking ring
F3 Seal
F4 Graduated blender jug
F5 Lid
F6 Lid cap
G Min speed
H Max speed
I Pulse button
„ Clean all the parts (F, J, K, L, M, N) with warm water and washing up liquid except for
the motor unit (A) which must never be immersed in water or placed under running water
(see section Cleaning).
CAUTION: The blades are extremely sharp; handle them with caution when using or
cleaning the appliance.
„ Make sure all the packaging has been removed before operating the appliance.
„ Important note: Turn the control knob (E) to
motor unit (A).
„ The appliance will start only if the blender jug is locked correctly on the motor unit.
„ Do not operate the appliance if the lid is not in place.
Moisten the seal (F3) (even if already fitted on the blade unit (F1)). Be careful to correctly fit
the seal (F3) back onto the blade unit (F1) the correct way up (Fig 11).
„ Check the seal is in place on the blade unit.
„ Turn the jug upside down and place the blade unit on the base of the jug (Fig 1).
„ Fit the locking ring (Fig. 2) and lock it by rotating it through a quarter turn in the clockwise
direction.
13

SAFETY INSTRUCTIONS

DESCRIPTION

BEFORE THE FIRST USE

ASSEMBLING AND FITTING THE JUG
J Spatula* (accessory depending on
model)
K Herb chopper* (accessory depending on
model)
K1 Seal
K2 Herb chopper blade unit
L Spice grinder* (accessory depending on
model)
L1 Seal
L2 Spice grinder blade unit
M Herb chopper and Spice grinder bowl*
(accessory depending on model)
N Mini chopper* (accessory depending on
model)
before placing the blender jug (F) on the