Sim Card And Battery; About Your Sim Card - Pantech pursuit II Manual Del Usuario

Tabla de contenido

Publicidad

SIM card and battery

About your SIM card

When you subscribe to your network operator, you
receive a SIM (Subscriber Identity Module) card
containing your registration information, PIN code, etc.
Like a credit card, it should be kept secure and handled
carefully. Do not bend, scratch or expose it to moisture.
Avoid static electricity.
To avoid corrupting your SIM card's memory, always turn
off your phone before removing or inserting your SIM
card.
About your battery
Your phone uses a Li-Ion battery. Make sure to use an
authorized battery and charger only. For more details,
please inquire at your nearest dealer.
note: Unlike other forms of battery technology, you can
recharge a Li-Ion battery while some charge remains
without reducing your phone's autonomy due to the
"battery memory effect" inherent in those technologies.
18
Installing/removing SIM card and battery
1. Remove the battery cover from
the unit.
- To remove the battery cover,
place your finger nail in the
groove at the bottom of the
unit, and then lift it up.
2. Insert the SIM card into the slot.
The gold contacts of the SIM
card should face down.
3. Slide the connector of the battery
into the notch located at the top of
the unit. Insert and press the lower
side of the battery until you hear a
click. Make sure you align the gold
contacts on the battery end with
the contacts on the phone. If the
contacts on the battery are not
properly aligned, the phone and the
battery could be damaged.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido