Numark Stealth Control Inicio Rápido página 3

:: Stealth Control Quickstart Guide
This Quickstart Guide explains how to quickly setup and begin using the Numark STEALTH
CONTROL DJ system. Please take a few minutes to go through this Quickstart and get familiar
with the setup procedure and basic controls.
We have designed STEALTH CONTROL as a complete system for software-based DJs. STEALTH
CONTROL is a MIDI-compliant device and can be used with any software which supports the
MIDI protocol. We have included two software packages – Native Instruments' Traktor 3 LE and
MixMeister Fusion Live – enabling you to DJ right out of the box.
We also highly recommend reading the software reference manuals, included on the installation
disc, in order to take full advantage of STEALTH CONTROL. Happy DJing!
A NOTE ABOUT MIDI CONTROL :::::
The Stealth Control was designed as a MIDI-compliant device, allowing you to
control any computer application which supports the MIDI protocol. This means that
you can not only use the Stealth Control with the included software, but can also use
the controller with a variety of other music and video applications as well. In order to
use the Stealth Control with your favorite software, you will have to enable the
Stealth Control as a MIDI input device in your software's preferences. Please note
that depending on your software, the Stealth Control may not necessarily show up as
"Stealth Control" in the MIDI preferences.
Please Note: If you are using the Stealth Control with a USB hub, we recommend that you either use a
powered hub, or the optional 6V 1A power adapter. This will ensure proper operation.
BOX CONTENTS
STEALTH CONTROL
QUICKSTART MANUAL
SAFETY & WARRANTY INFORMATION
USB CABLE
TRAKTOR LE CD
MIXMEISTER FUSION LIVE COUPON
1