Craftsman 917.28671 Manual Del Operador página 8

NOTE: "You may now roll your tractor off the
skid. Follow the instructions belowto remove
the tractor from the skid.
WARNING: Before starting, read, um
derstand and follow all instructions in the
Operation section of this manual. Be sure
tractor is in a well-ventilated area. Be sure
the area in front of tractor is clear of other
people and objects.
TO ROLL TRACTOR OFF SKID (See
Operation section for location and
function of controls)
1_ Raise attachment lift lever to its highest
position,
2o Release parking brake by depressing
brake pedal.
3_ Place freewheel control in disengaged
position to disengage transmission (See
"TO TRANS PORT" in the Operation sect
tion of this manual).
4, Roll tractor forward off skid.
5. Remove banding holding the deflector
shield up against tractor_
Continue with the instructions that follow_
CHECK TIRE PRESSURE
The tires on your tractor were overinflated
at the factory for shipping purposes, Correct
tire pressure is important for best cutting
performance.
, Reduce tire pressure to PSI shown on
tires.
CHECK DECK LEVELNESS
For best cutting results, mower housing
should be properly leveled, See "TO LEVEL
MOWER" in tile Service and Adjustments
section of this manual°
CHECK FOR PROPER POSITION OF
ALL BELTS
See the figures that are shown for replacing
motion and mower blade drive belts in the
Service and Adjustments section ofthis man_
uaL Verify that the belts are routed correctly°
CHECK BRAKE SYSTEM
After you learn how to operate your tractor,
check to see that the brake is operating prop-
erlyo See "TO CHECK BRAKE" in the Service
and Adjustments section of this manual,
CHECKLIST
Before you operate your new tractor, we
wish to assure that you receive the best
performance and satisfaction from this
Quality ProducL
Please review the following checklist:
_' All assembly instructions have been
compteted_
#z No remaining loose parts in carton.
V f Battery is properly prepared and
charged.
J" Seat is adjusted comfortably and tight-
ened securely.
V f All tires are properly inflated. (For ship-
ping purposes, the tires were overinflated
at the factory),
#f Be sure mower deck is properly leveled
sid e-to-side/fro nt4o-rear for best cutting
results. (Tires must be properly inflated
for leveling).
v f Check mower and drive belts. Be sure
they are routed properly around pulleys
and inside all belt keepers°
J" Check wiring. See that all connections
are still secure and wires are properly
clamped.
v f Before driving tractor, be sure freewheel
control is in "transmission engaged"
position (see "TO TRANSPORT" in the
Operation section of this manual).
While learning howto use your tractor, pay ex-
tra attention to the following important items:
/" Engine oil is at proper level.
v/' Fuel tank is filled with fresh, clean, regular
unleaded gasoline.
J" Become familiar with all controls, their
location and functiom Operate them
before you start the engine
_/" Be sure brake system is in safe operating
condition.
_" Be sure Operator Presence System and
Reverse Operation System (ROS) are
working properly (See the Operation and
Maintenance sections in this manual).
V/ It is important to purge the transmission
before operating your tractor for the first
time, Follow proper starting and transmis-
sion purging instructions (See "TO START
ENGINE"and"PURGETRANSMISSlON"
in the Operation section of this manual).
REEMPLAZAI
_,DVERTEI,
terminales de I
de tuerca o cue
con ambos ter_
instalar la bate1
los relojes de
El terminal pos
para evitar las
tierra por accic
1, Levante ef
2_ Desconectm
primero y I,
y remueva
3, Instale la n
misma pos
4. Primero, cc
(B) con el
hexagonal
Apri_telos
erla terrain
5, Conecte eli
terminal ne!
tuerca que [
6_ Sierre el c_
(Positivo) ('_
Cable rojo
PARA CAMBI
DELANTERA
1, Levante et
2, Tire el suj
agujero en
3, Cambie la
el sujetado
hacia atr&s
del enrejao
4, Cierre el c_
ENTREClERR
El alambrado
real funcionam
funcionar, o le
. Revise el a
alambrado €
de Repuestc
PARA CAMBlJ
C&mbie]o pot
amps, tipo aut
est& ubicado d
8