Troy-Bilt 020213 Instrucciones De Uso página 5

Section 1: Safety Rules
[
CAUTION
• DO NOT tamper with governed speed.
, DO NOT operate pressure washer above rated pressure.
CAUTION
DO NOT secure spray gun in open position.
DO NOT leave spray gun unattended while machine is
running.
NEVER use a spray gun which does not have a trigger lock or
trigger guard in place and in working order:
Always be certain spray gun. nozzles and accessories are
correctly attached.
CAUTION
• DO NOT point spray gun at glass when in jet spray mode.
, NEVER aim spray gun at plants.
i
CAUTION
If you have questions about intended use, ask dealer or
contact Briggs & Stratton Power Products.
DO NOT siphon standing water for the water supply. Use
ONLY cold water (less than I00°F).
NEVER operate units with broken or missing parts, or
without protective housing or covers.
DO NOT by-pass any safety device on this machine.
Before starting pressure washer in cold weather, check all
parts of the equipment to be sure ice has not formed there.
NEVER move machine by pulling on high pressure hose. Use
handle provided on unit.
Check fuel system for leaks or signs of deterioration, such as
chafed or spongy hose, loose or missing clamps, or damaged
tank or cap. Correct all defects before operating pressure
washe_:
This equipment is designed to be used with Briggs & Stratton
Power Products authorized parts ON LY. If equipment is used
with parts that DO NOT comply with minimum specifications
user assumes all risks and liabilities.
O