2. Notes on installation
•
Do not connect this printer to a PC until the prompt message appears. If this printer has
already been connected to a PC prior to software installation, immediately remove the
USB plug from the PC and wait for the software prompt.
•
When installing it to Windows
•
When installing the software, the screen shown right may be
displayed. At this time, click [OK] and install it all over again.
•
After terminating all other applications, begin installing the
software. Especially, when the application of Microsoft
is running, Add-In may not be set correctly.
3. Installing the software
This section explains how to install the P-touch Editor 4.2, P-touch Address Book 1.0,
Printer Driver, and User's Guide as a whole.
The procedure for installing them varies depending on the OS of your PC.
The following is the example for Windows XP.
1
Start up the PC and insert the CD-ROM into CD-ROM drive.
QL-series Installer starts up and P-touch Setup screen is displayed.
•
It may take a time to display the screen.
•
If it does not start up automatically, double click "Setup.exe" icon in CD-ROM.
2
Click "Standard Installation".
The preparation for installing the software
starts and License Agreement screen is
displayed.
Each button enables the following
operation.
1
Standard Installation
P-touch Editor 4.2,
P-touch Address Book 1.0,
Printer Driver, and User's Guide
can be installed as a whole.
2
Custom Installation
P-touch Editor 4.2, P-touch Address Book 1.0, Printer Driver, and User's
Guide can be installed individually.
3
Show User's Guide
Software User's Guide (PDF Manual) can be referenced without installing it.
4
Install Acrobat Reader
"Adobe
Manual) can be installed.
®
Adobe
Acrobat
not install it.
®
2000/XP, log in by the authority of administrator.
®
®
®
Acrobat
Reader
®
®
Reader
5.0 will be installed. If you have higher version, do
®
Office
1
2
3
4
" to reference Software User's Guide (PDF
®
43
STEP
1
STEP
2
STEP
3
STEP
4