First Starting - Glass 1989 NUBEA Serie Manual De Uso

- After the installation, check that the bathtub is clean. Fill it up with water at 40+/-5°C
up tp the highest jet level that allows the system functioning.
- Make sure that water has covered the jets.
- Make sure that the jets are open, otherwise turn the diffuser anticlockwise (only if
available on the model).
- Start the system and let it running for 10 minutes minimum. Without draining the
bathtub, stop the hydromassage system and after 10 minutes minimum, check all
the piping, the joints and the connections to find any water leaks.

FIRST STARTING

5
EN