Tabla de contenido
Publicidad
CARE &
CLEANING:
MAINTENANCE
CAUTION: MAKE SURE THE MOTOR
BASE IS UNPLUGGED FROM THE
POWER SOURCE BEFORE INSERTING
OR REMOVING ANY ATTACHMENT AND
BEFORE CLEANING.
CAUTION: DO NOT IMMERSE THE MOTOR
BASE INTO WATER OR ANY OTHER
LIQUID.
CAUTION: HANDLE BLADES CAREFULLY
AS THE BLADES VERY SHARP.
1
Separate/remove all parts from each other.
2
Clean the motor base with a damp cloth and
wipe dry.
NOTE: The Stainless Steel Ninja
dishwasher safe.
3
Place the cups, lids and blades in the top rack of
the dishwasher.
4
Carefully hand wash the cups, lids and the
blades in warm, soapy water with a soft cloth.
NOTE: If the appliance needs servicing, please
call Customer Service at 1-877-646-5288.
1 0
STORING:
1
Store the Ninja Auto-iQ Pro Complete upright.
Secure the power cord on the back of the base
by wrapping the cord around the cord wrap. Do
not place anything on top of the unit. Store the
cups and the rest of the attachments where they
will not be damaged and won't cause a hazard.
®
Cup is NOT
OR
w w w . n i n j a k i t c h e n . c o m
®
RESETTING THE MOTOR
THERMOSTAT:
The Ninja Auto-iQ Pro Complete features a unique
safety system that prevents damage to the unit's
motor and drive system should you inadvertently
overload the appliance. If the appliance is
overloaded, the motor will stop. To reset the
appliance, follow the resetting procedure below:
1
2
3
4
5
Unplug the appliance from the electrical outlet.
Remove and empty the cup and ensure that no
food is jamming the cutting blades.
Allow the appliance to cool for approximately
30 minutes.
Re-install the cup onto the motor base and re-
plug the appliance into the electrical outlet.
Proceed with using the appliance as before
while making sure not to exceed the maximum
recommended capacities.
Publicidad
Tabla de contenido
