Tabla de contenido
Publicidad
A
B
ASSEMBLY
ASSEMBLAGE
ARMADO
For best results, follow the recipe/ingredient loading instructions found in your Inspiration Guide.
CAUTION: DO NOT BLEND HOT LIQUIDS.
ALLOW THE LIQUIDS OR FOODS TO COOL TO ROOM TEMPERATURE BEFORE BLENDING.
IMPORTANT: DO NOT OVERFILL. TO AVOID SPILLING, DO NOT ADD INGREDIENTS PAST THE "MAX FILL" LINE.
ASSEMBLY &
BEFORE FIRST USE:
USE OF NUTRI
•
Remove all packaging material and labels from
the appliance.
NINJA
CUP
®
•
Wash the lids, cups, and blades in warm, soapy
water with a soft cloth.
NOTE: Ninja
Auto-iQ
®
™
Technology can sense
•
Rinse and dry thoroughly.
which container is on the
•
NOTE: The Double Wall Stainless Steel Ninja
motor base. The function
Cup is NOT dishwasher safe.
lights will illuminate
•
Lids, cups, and blades are all dishwasher safe. It
depending on which
is recommended that the lids and attachments
Nutri Ninja Cup is placed
be placed on the top rack. Ensure that the Pro
on the motor base.
Extractor Blades
before placing in the dishwasher.
•
Wipe the motor base clean with a damp cloth.
ASSEMBLY:
1
Place the motor base on a clean, dry, level
surface such as a counter or tabletop. Press
down on the motor base to make sure the
suction cups adhere to the counter or tabletop.
2
Add ingredients to the Nutri Ninja cup.
8
C
UTILISATION
3
Place the Pro Extractor Blades onto the cup and
tightly screw on clockwise (A) until you have a
good seal.
4
Turn the Nutri Ninja cup upside down and place
it onto the motor base (B), aligning the tabs on
the cup with the motor base. Rotate the Nutri
Ninja cup clockwise until it locks in place (you
will hear a click when the lock is engaged).
USE:
5
Once the cup is engaged, the programs
available for that attachment will illuminate.
Select the program (C) desired based on your
are removed from the cups
™
recipe. The Auto-iQ program will stop the
appliance automatically at the end of the
program.
6
To pause the program, press the selected speed
or Auto-iQ Program a second time.
w w w . n i n j a k i t c h e n . c o m
®
USE
USO
D
E
REMOVAL
DÉMONTAGE
EXTRACCIÓN
REMOVAL:
7
Once you have reached your desired
consistency, press the Power button to turn the
program off. Turn the Nutri Ninja cup counter-
clockwise (D) and pull straight up to remove (E).
8
Turn the cup upright and remove the Pro
Extractor Blades by twisting the Pro Extractor
Blades counter-clockwise.
9
Place the Sip & Seal
lid onto the Nutri Ninja
®
cup, twist to seal, and enjoy!
10 To remove the motor base unit, tip the unit
forward from the rear to easily disengage the
suction cups.
Publicidad
Tabla de contenido
