Installation Instructions; Identify The Vent Location; Measure Dimension To Fit - Ubbink Rolux Instrucciones De Instalación

Installation Instructions

®
Rolux Horizontal Discharge Vent System
1
Identify the vent location
Case A:
Installation with Male Appliance Top
Steps:
Case A: Place the horizontal Discharge Adapter on the appliance.
Case B: Place the 90° Vent Pipe Elbow on the appliance.
- Mark position on wall
- Or use template provided with water heater
- Cut hole, covering the top of the water heater to prevent debris from entering
2
Measure dimension to fit
Reference page 4 of these installation instructions for the acceptable pitch direction.
0
Case B:
Installation With Female Appliance Top
D = 5.5" (140 mm)
NOTE
Cover the top of the heater
to prevent debris from
entering when cutting
Metal Inner Pipe
D = 5.5" (140 mm)
White Outer Pipe