Pb Value; Contrast; Backlight - hager TX460 Instrucciones De Uso

8.9 PB value

This menu is displayed only when one or more push-button of
your environment control and regulation were configured to
issue a value (percentage, lighting level, etc). It allows
modifying the issued value.
• Select the push-button that you want
to set using
• Press button
• Set the associated value using
button
• Press button
to the screen PB value.
• Follow the same steps to modify one
or more other PB values.
◀
• Press button C to return to the Settings screen.

8.10 Contrast

This menu allows adjusting the display according to the
outside brightness level.
• Select contrast using touches
and
• Press button
to the screen Settings.
96
and .
to confirm.
and .
to confirm and return
.
to confirm and return

8.11 Backlight

Whenever the device is used, the environment control and
regulation lights up for a certain time period. This time can be
set OFF or the Backlight can be turned OFF from this menu.
• Select the time period desired using
button
• Press button
to the screen Settings.
When the OFF mode is confirmed, the operation of the
infra-red proximity detection is stopped. However, the
backlight can still be turned ON by pressing a sensitive
button for a limited settable time period. The selected time
period of backlighting starts the operation of the infra-red
proximity detection device. The lighting time period is the
same in the case of infrared detection and when pressing
the sensitive button.
97
and .
to confirm and return