Options - Paradox Spectra 1641BL Manual Del Usuario

[101] TEXT
_
[UC]
Cursor indicates the selected character. Press the
scroll the characters. Press the numerical keys from [0] to [9] to
replace the selected character. Refer to "Character Sets" on page 24.
[101] to [116] = Zone 1 to Zone 16
= Partition 1
[133]
= Partition 2
[134]
= Keypad Name (default: "Paradox Security")
[135]
[500] to [507] = Notes (this is what the user will see when the [

[2] OPTIONS

In step 3 of "Entering Keypad Programming Mode" on
page 3, select option [2]. You will now be able to enable or
disable the keypad's options as shown in Table 1. Press the
corresponding keys until all desired options are set, then
press [
ENTER
4 Installation Guide
Indicates current character style. Press
the
[
[
[
is pressed)
].
key to change:
2
[ ]
FNC
= Upper Case
]
UC
= Lower Case
]
LC
= Special
]
SP
or keys to
[ ] [ ]
HELP
] key