4. INSTALLATION INSTRUCTIONS
When selecting a location for your appliance you should make sure the floor is flat and firm, and the room is
well ventilated. An average ambient temperature must be observed. This temperature is specific according to
the climatic class of the device: N : This refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 °C to 32 °C
Before using this appliance
▪
Remove the exterior and interior packing.
▪
Before connecting the appliance to the power source, let it stand upright for approximately 24 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
▪
Clean the interior surface with lukewarm water using a soft cloth.
▪
When disposing your appliance, please choose an authorized disposal site.
▪
Place your wine cooler on a floor that is strong enough to support it when it is fully loaded. To level
your Wine cooler, adjust the front leveling leg at the bottom of the wine cooler.
▪
Adequate ventilation is required, do not block the front air outlet.
▪
This wine cellar is designed for free-standing
▪
Connect the cellar to a single socket, leaving a 30-mm gap between the back of the cellar and the
wall. Be careful to support it, so that your wine cellar is perfectly level (use of a spirit level is
recommended). This will prevent any movement due to instability, causing noise and vibration, and
will ensure that the door seals perfectly.
▪
This appliance is intended to be used exclusively for the storage of wine.
▪
This appliance is using flammability refrigerant. So never damage the cooling pipe work during the
transportation.
Caution
▪
Store wine in sealed bottles.
▪
Do not overload the cabinet.
▪
Do not open the door unless necessary.
▪
Do not cover shelves with aluminum foil or any other shelf material which may prevent air circulation.
▪
Should the wine cooler be left empty for long periods it is suggested that the appliance is unplugged,
and after careful cleaning, leave the door ajar to allow air to circulate inside the cabinet in order to
avoid possible condensation, mold or odors forming.
CAUTION: please keep the appliance away from substance, which can cause ignition.
Ambient room temperature limits
This appliance is designed to operate in ambient temperatures specified by its temperature class marked on
the rating plate.
The ambient temperature affects the interior temperature and humidity of your cellar. For optimal operation,
the settings of your cellar are carried out for ambient temperatures of 23 ° C to 25 ° C.
CLASS
Extended temperate
Temperate
Subtropical
Tropical
5. USE INSTRUCTIONS
➢ Display board for single temperature zone models: PRO110 and PRO160
SYMBOL
AMBIENT TEMPERATURES RANGE (°C)
SN
N
ST
T
22
From +10 to +32
From +16 to +32
From +16 to +38
From +16 to +43